Mini Speed Dome Camera Introduction Manual
27
▌▌
Pattern Setup
▌▌
Edit Pattern
<DOME CAMERA SETUP>
→
<PATTERN SETUP>
Pattern Number [1~4]
Selects Pattern number to edit.
If a selected pattern number is not defined,
"UNDEFINED" will be displayed under
selected pattern number.
Clear Pattern [CANCEL/OK]
Deletes data in current pattern
Label Display [ON/OFF]
Edit Pattern [OK/CANCEL]
OK: Edit the pattern function
Cancel: Don't execute the pattern function.
Edit Pattern
Starts editing pattern. By using Joystick, move
to start position with appropriate zoom. To start
pattern recording, press OPEN key. To exit this
menu, press CLOSE key. Move camera with
joystick of controller or run preset function to
memorize the path (mostly curve path) in a
selected pattern. Maximum 500 commands can
be stored in a pattern
Edit Label
Edits Label to show on monitor when preset
runs MAX. 18 alphabets are allowed. Enter edit
label, “?” cursor will be displayed on the screen,
using up/down of joystick to select character,
and using left/right to move cursor, After
inputting, press “OPEN” key to save and exit
the setting.
Run Pattern Run current Pattern
