bettini SD-373C, Руководство пользователя

Страница: 47 / 76

47

Saving Preset Position :
Selecting a preset number and pressing the Enter key redirects the menu to the screen shown below.
Using the joystick, adjust the location of the Pan and Tilt functions and then set the Zoom and Focus
command. In Preset Settings, the Zoom and Focus command is controllable only by the Zoom command

PTZF Settings
1. If you open the PTZF setup menu, you will see the following window. You can use the joystick to select a
desired number.
2. Select a preset number and press ENTER. You will move to the setup screen. Using the joystick, adjust
the location of the Pan and Tilt functions and then set the Zoom and Focus command. In Preset Settings,
the Zoom and Focus command is controllable only by the Zoom command. For switching Zoom & Focus,
Use ENTER and ESC key..

Edit
With this feature, you can edit or save the camera scene related settings
- Focus Mode : Refer to the section entitled Setting Up Your Camera.
- Brightness : Refer to the section entitled Setting Up Your Camera.
- Iris : Refer to the section entitled Setting Up Your Camera.
- Back Light : Refer to the section entitled Setting Up Your Camera.
- Day & Night : Refer to the section entitled Setting Up Your Camera.
- SSNR : Refer to the section entitled Setting Up Your Camera.
- Post Action : Enables setting up an automatic action after the camera arrives at a selected preset location.
MD : Commands the camera to perform the Motion Detection function. If Focus mode is set to
Auto, the MD function may not work properly in a environment.
OFF : Select this when no action is desired.
- Others : You can set AGC, Stabilizer, SSDR, Shutter, Sens-Up, White Balance SSNR functions. For terms
related to settings, refer to the camera menu.