Better Quick Dually, Руководство оператора

Страница: 10 / 37

10
BetterOutdoorProducts.com
Product Overview
Figure 2
1. Oil dipstick
2. Headlights
3. Gas tank
4. Gas Cap
5. Side discharge chute
6. Front caster wheel
7. Belt Guard Cover
Controls
Become familiar with all the controls (Figure 3)
before you start the engine and operate the
machine.
Figure 3
1. Ignition Switch
2. Manual Choke (if equipped)
3. Throttle
4. PTO
Control
5. Left Motion Control Lever
6. Right Motion Control Lever
7. Speed Limit Lock
Ignition Switch
This switch is used to start the mower engine.
Manual start engines have two positions: Run and
Stop. Electric start engines have three positions:
Start, Run and Stop.
Choke
Use the choke when starting a cold engine.
Throttle Control
The throttle controls engine RPM.
Blade Engagement Control (PTO)
The blade engagement control (PTO) is used to
engage the drive for the mower blades. Move the
lever up and to the right to engage the blades. To
disengage the blades, move the blade control lever
(PTO) down. The left side motion control lever must
be depressed for blades to engage.
Motion Control Levers
The motion control levers are used to drive the
machine forward, reverse and turn either direction.
Note: Determine the left and right sides of the
machine from the normal operating position.
Speed Limit Lock
The speed limit lock is used to set the maximum
forward speed the machine will travel. Loosen the
locking knob and move forward to increase speed,
move it back to decrease speed.
Fuel Shut-off Valve
Figure 4
Close the fuel shut-off valve (under the fuel tank)
when transporting or storing the mower.
2
1
4
6
3
5
1
2
6 5
4
3
7
7