20
Troubleshooting
If you suspect something is wrong, immediately
switch power off. Immediately stop using it and
call the store where you purchased it.
Never try to repair the unit yourself because it
is dangerous to do so.
General
No power or no sound.
Car's engine switch is not on.
Turn your car's key to ACC or ON.
Cable is not correctly connected.
Check connection.
Fuse is blown.
Replace fuse.
Check volume or mute on / off.
If the above solutions cannot help.
Press the RESET button.
Disc
Disc is inside but no sound.
Disc is upside down.
Place disc in the correct direction, and the
label side up.
Disc is dirty or damaged.
Clean disc or change another disc.
Disc sound skips, tone quality is
low.
Disc is dirty or damaged.
Clean CD or change another CD.
Sound skips due to vibration.
Mounting angle is over 30
o
.
Adjust mounting angle to less than 30
o
.
Unstable mounting.
Mount the unit securely with the mounting
parts.
Radio
Noise in broadcasts.
Station is too far, or signals are too weak.
Select other stations of higher signal level.
Preset station lost.
Battery cable is not correctly connected.
Connect the battery cable to the terminal
that is always live.
Error display messages
Display shows ERROR.
Disc is dirty, damaged or upside down.
Press to eject the disc.
When video file initializing time is
too long.
File read error or file type not supported.
Press SRC to exit. Then press SRC to play
disc again.
