19
Installation Guide
Important: Remove these two screws before installation. Otherwise, the player will not work.
1. Inset mounting collar into the dashboard, and bend the mounting tabs out with a screw-
driver.
Make sure that lock lever
is flush with the mounting collar (not projecting outward).
2. Secure the rear of the unit.
After fixing mounting bolt and power connector, fix the rear of the unit to the car body by rubber
cushion.
3. Insert trim plate.
Installation Procedures
First complete the electrical connections, and
then check for correctness.
Reset
Press
button to flip down the panel. Then
press the
RESET
button with a pointed object
to reset the unit to the original status.
Note: Press the
RESET
button will erase the
clock and stored stations.
Installation Opening
This unit can be installed in any dashboard
having an opening as shown below.
The dashboard should be 4.75mm - 5.56mm
thick in order to be able to support the unit.
Mounting bolt
rubber cushion
Transport
screws
53
m
m
183mm