6
INSTALLATION
IMPORTANT:
Before commencing installation, ensure that
there are no pipes or wires located behind the wall that you will
be drilling into.
•
Ensure that the hanging location has been decided upon and
marked clearly to avoid unwanted damage in the wall due to
incorrect positioning.
•
Check there the mirror is not damaged prior to installation.
•
Take care unpacking, do not use a sharp blade to open as
this may damage the mirror and void your warranty.
INSTALLATION
The cabinet is supplied with a hanging bar to mount the cabinet onto the wall. At
the back of the cabinet there is a corresponding bar which is designed to slot onto
the hanging bar.
1.
Choose the desired position of the cabinet, and from that determine the
required position of the hanging bar.
2.
Hold the hanging bar in position, using a spirit level to ensure it is level.
3.
Use a pencil to mark the position of the 3 holes on the wall.
4.
Place the hanging bar to one side, and drill the holes with a suitable drill bit.
5.
Insert wall plugs into the holes, ensuring they are flush to the wall.
6.
Place the hanging bar onto the wall, lining up the 3 holes with the wall plugs.
7.
Secure the hanging bar to the wall using the supplied screws.
8.
You will now be able to hang the cabinet. Carefully lower the cabinet onto the
hanging bar, ensuring that is secure and will not slide.
9.
Open the cabinet door and mark the wall with a pencil through the security
hole on the back panel.
10.
Remove the cabinet, drill the hole then place a wall plug into the hole you
