ELECTRICAL REQUIREMENTS
Connect the electrical cord to a standard 120Volt AC 60Hz 15 Amp electrical supply which has
protection devices of under-voltage, over-voltage, over-current as well as a residual current device
(RCD) with a maximum residual current rating of 0.03A.
The log splitter has an overload protection switch. If the log splitter suddenly stops working, check
your electrical supply for faults. The switch will need to be reset before operating again.
EXTENSION CORD REQUIREMENTS
Using an extension cord can reduce the amount of electrical supply needed to operate the log
splitter at its highest efficiency.
Failure to use the correct extension cord may result in damage to the splitter and reduced ability to
split logs.
Recommended cord size:
14ga. @ 20ft, 12ga. @ 50ft, 10ga. @ 100ft, 8ga. @ 200ft
Betst Products 1-877-876-7895 [email protected]
7