Cover, Remove any debris
blocking motor fan from turning,
Will Motor Fan Turn By Hand
Repair/Replace
7. Overheating
In High Temperature and/or
during Rapid Use the Hydraulic
Fluid may have overheated. Allow
the machine to cool
Fails to Split Logs
1. Log is Improperly positioned
Refer to Log Splitter Operation
section in this manual.
2. The size or hardness of the log
may be greater than the ability of
the splitter to split.
Certain type of wood grain and
fiber may not be able to be split
with this splitter without reducing
the length of the log.
3. Splitting wedge is dull or
damaged
Refer to Sharpening the Wedge
section in this manual.
4. The Hydraulic Level may be
Low
Check Hydraulic Fluid Level, see
Checking Oil Level section in this
manual.
Betst Products 1-877-876-7895 [email protected]
14
