User manual
BETSO WTCS-1
1.
Battery voltage in volts
2.
The lower level segment – indicates discharged batteries
3.
The higher level segment – indicates fully charged / new batteries
10.
Informative 3 color (RGB) LED function
Blue ON
Power On + active RF transmission
Blue Blinking
Power On + No RX units (if WTCS-1 is set as TX unit)
Power On + No Rf signal (if WTCS-1 is set as RX unit)
Green ON
Power On, Rf Off, jammed (WTCS-1 is used as slave unit)
Green Blinking
Power On, Rf Off, Not jammed (WTCS-1 is used as master unit)
Red ON
Power On, Low batteries indication
Red Blinking
Power Off, time code is backed up
All OFF
Power Off
11.
MovieSlate 8 Application quick functionality setup
•
Run the iOS Settings app > Wi-Fi – and join the network created by WTCS-1
•
Run MovieSlate 8 Application
•
Make sure MovieSlate's Pro Features are enabled.
•
Go to the MovieSlate tab
•
Tap the time code display
•
Tap the SYNC button in the keypad
•
Tap Receive, then tap Wi-Fi (or enable SETTINGS > TI SYNC >
AUTO-RECEIVE WIFI).
•
Upon connection, MovieSlate 8 will indicate that it has synced with the WTCS-1
and start displaying its synced time code.
23
©
Copyright BETSO ELECTRONICS s.r.o.
