Beton Trowel nv
Nijverheidsstraat 11
1840 Londerzeel/Belgium
Tel: +32 (0)52 315 350 - Tel: +32 (0)52 315 351
Fax: +32 (0)52 303 739
E-mail: [email protected]
BE 0821.249.312
www.betontrowel.com
BNP FORTIS:
ING:
BE81 0015 9813 5624
BE
- GEBABEBB
BBRUBEBB
Pag.
8/14
5
Operation
On level surfaces the screed moves forward or backward rapidly, depending on the
tilt of the handle. On uneven surfaces or inclines, light forward pressure on handle
may be required to assist the screed in moving. Lean the handle up or away from you
to make the screed travel toward you (i.e. forward). Lean the handle down or toward
you to make the screed travel away from you (i.e. backward).
ALWAYS OPERATE THE MACHINE AT FULL THROTTLE. If excessive vibration is
felt through the handle, do not operate until the engine is checked and set at its
maximum running speed of 3600 rpm.
The handle has four (4) adjustment clamps to allow the operator to use the screed
more comfortably. Ensure that the screws of all of these clamps are tightened to
securely hold the handle sections rigidly. A loose clamp will cause that section to
rotate and/or slide away from the desired position.
6
Lubrication
ENGINE OIL:
Always check engine oil before starting and at regular intervals
thereafter. Use proper engine oil as recommended
– see chart below. Keep engine oil
clean, change accordingly. Fill crankcase to levels as recommended in
manufacturer’s engine manual.
