Beton Trowel nv
Nijverheidsstraat 11
1840 Londerzeel/Belgium
Tel: +32 (0)52 315 350 - Tel: +32 (0)52 315 351
Fax: +32 (0)52 303 739
E-mail: [email protected]
BE 0821.249.312
www.betontrowel.com
BNP FORTIS:
ING:
BE81 0015 9813 5624
BE
- GEBABEBB
BBRUBEBB
Pag.
10/14
2
Service
Due to the nature and environment of use, the machines could be exposed to severe
operating conditions. Some general maintenance guidelines will extend the useful life of your
Screed.
It is highly recommended that all maintenance and repairs are carried out by
approved dealers.
Always use genuine replacement parts; use of foreign parts may void your warranty
and result in injury or damage to property.
Refer to your engine manual for details of engine cleaning, maintenance, and your
engine’s warranty coverage.
Clean concrete, dust, and residue from the blade and base unit daily. Failure to do so
will result in decreased performance and premature failure.
The blade and lower base unit (i.e. below the engine) can be cleaned with a water
sprayer. Avoid getting water inside the engine housing or into the on/off switch on the
handle.
Clean the engine ventilation openings using a brush or damp cloth. Dirt, grease, or
concrete entering the ventilation openings will reduce engine cooling, leading to
premature engine wear and failure. Refer to your engine manual for more information.
