8.0 Care and maintenance
• It is essential to switch off the device and to disconnect the mains cable prior to cleaning.
• Clean all optical sensors on the device once a day with a brush or a soft cloth to prevent
any dust particles or paper pieces sticking to them. Then cover the device with a dust
cover or a cloth.
• All sensors (e.g. the sensors of the banknote feed, counter and output tray) should always
be cleaned with a brush or a soft cloth to ensure smooth operation.
• The inside of the device should be regularly cleaned with a soft brush or cleaner.
• The magnet sensor, UV light and UV detector should be cleaned with alcohol, water
(magnet head) and a soft cloth to ensure good detection performance.
Please note:
• If there is a problem with the device that you cannot rectify, please contact your supplier
or its customer service department.
• This device has been precision designed and thoroughly tested by our engineers. Errors
can, however, occur. Under certain circumstances original banknotes may be identified
as counterfeit. In this event, the counting process needs to be restarted.
9.0 SCOPE OF DELIVERY AND ACCESSORIES
9.1 The following are supplied with the device
• Operating instructions 1 copy
• 1 cleaning brush
9.2 Accessories
• 1 fuse (Ø 5x18)
• 1 set of banknote wheels (4 items)
• 1 drive belt
• 1 rubber resistance disc
• 1 external display (optional)
12
Part-No. 3820
BETEC
· Herzogstr. 55 · D-63263 Neu-Isenburg
Phone +49 (0) 61 02 / 310 67 · Fax +49 (0) 61 02 / 32 08 59
www.BETEC-Ideen.de · E-mail: [email protected]
© BETEC
MADE IN
CHINA
-BJ05_Anleitung engl. 01.11.2006 8:30 Uhr Seite 12