5
The regulations below must be carefully followed in order to avoid harm to the operator and damage to the machine.
• Read the labels on the machine carefully. Do not cover them for any reason and replace them immediately if they are dam-
aged.
• The machine must be used exclusively by authorized and trained personnel.
• When operating the machine be careful of other people.
• The machine is not suitable for cleaning carpets.
• The power cable outlet must be plugged into a grounded power outlet.
• Avoid damaging the power cable by crushing, bending, cutting or stressing it.
•
WARNING:
do not let the power cable come into contact with the rotating brush.
• Whenever the power cable is damaged, immediately contact a BETCO service center.
• Do not mix different types of detergent as this may produce harmful gases.
• Do not set containers on the machine.
• Machine storage temperature is between -10°F and 130°F, never store outside under humid conditions.
• Operating conditions: room temperature between 33°F and 100°F with relative humidity between 30% to 95%.
• Do not expose the machine to rain.
• Never use the machine in an explosive environment.
• Do not use the machine as a means of transport.
• Never use acidic chemicals which could damage the machine.
• Avoid running the brushes with the machine stopped as this could damage the fl oor.
• Never vacuum up fl ammable liquids.
• Never use the machine to gather dangerous powders.
• Use a powder fi re extinguisher in case of fi re. Do not use water.
• Do not hit against shelving or scaffolding. The operator must always be equipped with the appropriate safety device (gloves,
shoes, helmet, glasses, etc.)
• Do not use the machine on surfaces with an inclination greater than the one shown on the serial plate.
• The machine is designed to wash and dry fl oors simultaneously. Signal the presence of wet fl oors with suitable signs.
• If the machine does not work properly, perform routine maintenance. Otherwise, request the assistance of BETCO technical
support.
• When replacing parts ask for ORIGINAL spare parts from your Authorized BETCO Dealer and/or Retailer.
• Always turn off the machine and unplug the power cord whenever maintenance is performed.
• Never remove guards that require tools to remove.
•
Never wash the machine with direct or pressurized jets of water or with corrosive substances.
• Have your BETCO service center check the machine once a year.
• To prevent the formation of scale in the solution tank fi lter, do not store the machine with detergent in the tanks.
• Before using the machine make sure that all doors and covers are positioned as shown in this operating and maintenance
manual.
• When your BETCO machine is ready to be retired, the machine must be disposed of properly. It contains oils and electronic
components. The machine itself was built using totally recyclable materials.
• Use only brushes furnished with the machine or those specifi ed in the user's manual. Use of other brushes can compromise
safety.
• This machine must be operated by trained professionals.
GENERAL SAFETY REGULATIONS
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
