6
1. STARTING THE MACHINE
A. Attach the extension cord to the plug on the machine.
B. Insert cord through strain relief holder.
C. Plug into a grounded 110V/120V outlet.
D. Push down the start lever on the left side of the machine. The machine will
automatically start when the handle is lowered to an operating position.
E. To turn off the machine, simply raise the handle back to a locked an upright
position. The machine will automatically stop.
2. USING THE SWEEPING FUNCTION
To use the machine as a sweeper, simply remove the side shields from the
machine and install the dust collection bins.
A. Be sure the machine is unplugged from any power source.
B. Press the center locking pin on the side shield and slide the shield to the left.
Then lift the side shield from the mounting pins on the base.
C. Place the open end of the teardrop hole on the dust collection bin over
the mounting pins.
D. Slide the dust collection bin to the right until the center spring pin locks
it into place.
E. Repeat this installation on the other side of the machine.
F. Now the machine can be plugged in to a power supply and used to
sweep loose debris from the floor.
G. The machine can be operated in a forward and backward motion.
H. After use, remove the dust collection bins and empty debris.
WARNING: Be sure to keep loose carpets and cords from passing
under the machine while in operation.
MACHINE OPERATION
WARNING: Be sure to keep loose carpets and cords from passing
under the machine while in operation.
