BETCO E27200, Руководство оператора и каталог запасных частей

Страница: 6 / 52

6
If you are planning to transport the GeneSys scrubber, securing the machine(s) is key to keeping the machine(s) protected and
in good working condition. Below are some suggestions for how to efficiently and effectively secure the GeneSys™ scrubbers.
The GeneSys™ design lends itself to easy trailering and tying down – it only takes two straps strategically located.
TRANSPORTING THE MACHINE: TIE DOWN PROCEDURE
The GeneSys™ design lends
itself to easy trailering and tying
down – it only takes two straps
strategically located.
Solution tank creates easy
front tie down locations.
Scrub decks lift
to an 11-degree
“attack angle”
for easy ramping.
STEP 1
Before transporting up a trailer ramp - remove the squeegee assembly and
put it in an open, secure location on the trailer. If possible, wrap with a
shipping blanket.
STEP 2
Transport machine up the ramp into trailer and position it so that tie
downs can be used forward and rear of the machine and lower the scrub
deck (with pads on – especially the Orbital!)
STEP 3
Open the tank and route tie down straps across the front and rear of the
battery compartment as shown here.
(Note the placement of micro-fiber
cloths or other material to protect the rotomold tanks from scratches).
STEP 4
For the front straps, route them to tie down locations forward of the
machine. For the rear straps, route them to tie down locations to the rear of
the machine. See below. Ratchet tie down until machine is secure.