BETAFPV LiteRadio 3 Pro, Руководство пользователя

Страница: 7 / 24

External RF
Mode
Ch. Range
Receiver
Trainer
Mode
CH1-16
00
Master/Jack
SETUP 2/11
Mode
CRSF
OFF
● Radio Transmitter Setting and Binding (CC2500 version)
Confirm the built-in protocol: It's CC2500 version when the sticker in nano module
bay shows "CC2500".
1. These settings are required when using the internal CC2500 TX module, shown as
below.
Turn External RF option OFF. Turn on the Internal RF and select the corresponding
protocol under MULTI mode.
Binding: Enter the setup of mode interface, select Bind to do the linking.
Binding: For binding of the transmitter module, please refer to its manual to
complete the binding process..
2. These settings are required when installing and using the external TX module,
shown as below.
Turn on External RF and select the correct protocol based on the external module,
then set Internal RF to OFF option.
Type
Subtype
Status
Ch. Range
Receiver
Freq tune
No telemetry
FrSky
CH1-16
D16
00 [Bnd] [Rng]
0 RSSI(0)
SETUP 2/11
Mode
MULTI
Trainer
Mode Master/Jack
SETUP 2/11
No Telem
External RF
Mode
Low power
No Ch. map
OFF
Type
Subtype
Status
Ch. Range
Receiver
Freq tune
No telemetry
FrSky
CH1-16
D16
0 RSSI(0)
SETUP 2/11
Mode MULTI
00 [Bnd] [Rng]
06