Solution:
Change the channel mapping of the transmitter to AETR, then you can enter OSD menu
as the method we mentioned in chapter
6.1
.
• Enter OSD menu
• Move the cursor to RECEIVER option and enter RECEIVER sub-menu
-RECEIVER menu interface-
There are two functional zones for RECEIVER sub-menu. One functional zone is on the
upper of sub-menu, from which you can switch AETR and TAER by the cursor. Another
functional zone is on the bottom of sub-menu, from which you can examine whether the
channel mapping relationship of transmitter among Roll, Pitch, Yaw and Throttle is correct.
Please note that CHN5-8 on the bottom indicates the current AUX value of transmitter’s
channel 5 to channel 8.
Only when transmitter’s CHN6 value is set to 1.(Shown as CHN5-8
：
0:1:0:0), you can
switch the channel mapping between AETR and TAER. If transmitter’s CHN6 value is
0(Shown as CHN5-8
：
0:0:0:0), you can only check whether the transmitter channel is
correct in the below functional zone.
