BETAFPV 01020010, Руководство пользователя

Страница: 38 / 44

1 36
9. FAQ
Propellers can be deformed or fall off when quadcopter collides with an object. Bent or
missing propellers need to be replaced.
Firstly, use the included propeller removal tool to remove propellers from the motor.
The tool shoud be placed between the motor and the propellers. Please hold the motor
instead of the frame duct with your hand when removing propellers to protect the frame
from being deformed by overexertion.
Secondly, the distance between the replaced propeller and the motor is kept at about
2mm. There is no need to press down forcefully. Pressing down forcefully will cause
damage to the motor or the blade to deform, and rubbing agaist the frame when
quadcopter is powered on.
4 spare propellers are included: two each clockwise (CW) and counterclockwise
(CCW). CW propeller warps clockwise. It is used on the front left or rear right motor.
CCW propeller warps counterclockwise. It is used on the front right or rear left motor.
Install as in the diagram below.
The CW propeller corresponds to the motor with red and blue wires, and the CCW
propeller corresponds to the motor with black and white wires.
9.1 How to Replace Propellers and Motors
Approximately
2 mm
Red and Blue Wires
Black and White Wires
Clockwise (CW)
Counterclockwise (CCW)