2. Installation
2.
Installation of posts & panels
PLACEMENT OF THE POSTS (USE A TEMPLATE)
-
A template makes it much easier to place the posts correctly:
a mould of 2530 mm* needs to be used to see if the posts are
placed at a correct distance (measured center-center, with a
tolerance of +/- 5 mm)
-
The template must be made by the installer and must have 2
recesses into which the posts fit perfectly
-
Place the posts, correctly aligned (vertically and horizontally) and
with the correct distance between them. For end posts and corner
posts the distance is 3 cm smaller
-
Use a spirit level to ensure the posts are placed at the correct
verticle angle.
13
* dimension depends of panel type
*
18/05/2020 – Nylofor / Twilfix
®
- Installation manual
