HoriZen
®
Combinations of the panel-series -
heights of the panel elements
All elements of the HoriZen Prime panels can
be freely combined with each other. As the
panel height is not always the same, it is best to
align the top of the panels at the same height in
order to obtain a visually uniform appearance. If
you plan to install a fence with a single or
double gate, install the gate first and then align
the remaining panel elements with it.
The height indications are guide values for your
planning. They may vary slightly due to
temperature or by tongue and groove assembly.
HoriZen Prime WPC : 1830 mm
HoriZen gates: 1845mm
Basic principles:
dimensions and terminology (indicated in mm)
9
The necessary space for material expansion is
created automatically when the panels are
precisely aligned in the centre, when they are
assembled with the specified axis sizes and
intermediate dimensions.
Assembly on sloping terrain
For significant slopes, installation with posts for
concreting is recommended.
Please note: all boards in the HoriZen range must
be installed horizontally between the posts!
There are two options:
Option 1:
The elements and profiles run level at
the top, with or without an open space between
the bottom of the panel and the ground,
depending on the slope.
Option 2:
The profiles or elements are installed
stepped at the top in increments of 15 cm, i.e.
always with a height difference in relation to the
previous panel.
Option 1
Option 2
Corner
To make a 90° corner, screw a U-profile post to
the HoriZen post.
For other corners 2 posts are required
