4
ADJUSTMENTS
60
USA
TENSIONING THE CHAIN
To ensure the drive chain a longer life, it is
advisable to periodically check its tension.
Always maintain the chain clean and
lubricated.
If the chain play exceeds 30÷35 mm,
tension the chain by following these steps.
•
Loosen wheel spindle nut
1
.
•
Loosen counternuts
A
on either side of
the fork
•
Turn adjusting screws
B
on either side until
the desired chain tension is obtained.
•
Tighten counternuts
A
on either side of
the fork
•
Tighten nut
1
.
30÷35 mm
ADJUSTING THE HYDRAULIC
REBOUND DAMPER
Turn screw
G
to adjust the hydraulic re-
bound damper.
Turning the screw anticlockwise (out) de-
creases the damping effect.
Standard adjustment:
18 clicks from the completely closed position
A
B
A
B
1
G
