Beta RR 50 CC series, Руководство пользователя

Страница: 43 / 48

4
ADJUSTMENTS
43
GB
ADJUSTMENT OF REAR SHOCK AB-
SORBER (ENDURO)
Adjustment of spring load
Use ring nut ( A ) to adjust the damping ac-
tion of the shock absorber. The damping
action is adjusted by changing the stand-
ard 260 mm spring preload. Adjusting
range: 295. mm to 289 mm. see figure.
ADJUSTING THE REAR SHOCK ABSORB-
ER ON THE (ENDURO FACTORY)
The rear shock absorber on the FACTORY
version is equipped with external adjusters
which allow the vehicle geometry to be
adapted to different load conditions.
Adjuster (
B
), located near the lower shock
absorber mount, is used to adjust the
hydraulic damping during the rebound
(return) phase.
Knob (
C
), located on the expansion tank
of the shock absorber, adjusts the hydraulic
damping during the compression phase.
Turning knobs (
B
) and (
C
) clockwise in-
creases the damping action; conversely,
turning them anticlockwise decreases it.
WARNING:
The shock absorber contains high-pressure
gas. To prevent serious damage, it should
be removed and disassembled only by
skilled personnel.
In the event of any malfunction,
contact our authorized customer
service network.
414
A
124
289
292
56
129