Beta ENDURO SPORT, Руководство по эксплуатации

Страница: 38 / 60

3
ADJUSTMENTS
38
GB
ADJUSTING THE SHOCK
ABSORBER (ENDURO/MOTARD/
MOTARD SPORT/TRACK)
The motorcycle has two different positions
for the upper attachment of the shock
absorber.
Position
A
: standard position.
Position
B
: lowered position. The height of
the motorcycle reduces by 30 mm.
WARNING: locknuts with plastic ring are
for single use only. Once removed it must
be replaced.
ADJUSTING THE
COMPRESSION AND
EXTENSION BRAKE
(FACTORY)
Adjuster ( D ), located near the lower shock
absorber mount, is used to adjust the
hydraulic damping during the rebound
(return) phase.
Knob (
C
), located on the expansion tank
of the shock absorber, adjusts the hydraulic
damping during the compression phase.
Turning knobs (
D
) and (
C
) clockwise in-
creases the damping action; conversely,
turning them anticlockwise decreases it.
For standard setting, refer to page 12.
ADJUSTING THE SPRING
PRELOAD (ENDURO/
FACTORY)
To adjust the spring preload, use the pro-
cedure described below.
Rotate ring clockwise to increase the
spring preload (and consequently the
shock absorber preload) or anticlockwise
to decrease it.
B
A
ENDURO
FACTORY
In the event of any malfunction, contact
our authorized customer service network.