Beta ENDURO SPORT, Руководство по эксплуатации

Страница: 37 / 60

3
ADJUSTMENTS
37
GB
ADJUSTMENT OF GAS
CLEARANCE
Whenever the accelerator shows unloaded
travel exceeding 3 mm, measured from the
edge of the handle, you should adjust it by
means of carburettor register
B
.
ADJUSTING THE FORK
(FACTORY)
The hydraulic rebound damper determines
the behaviour of the telescopic fork during
extension and can be adjusted by means
of screw
1
. Turning the screw clockwise in-
creases the action of the rebound damper;
turning it anticlockwise decreases the ac-
tion of the rebound damper.
For standard calibration, refer to page
11.
ADJUSTING THE SPRING
PRELOAD (FACTORY)
Spring preload is adjusted by means of
screw
2
. Turning clockwise will increase
the preload, while rotating counter- clock-
wise decreases the preload.
For standard calibration, refer to page
11.
1
2