12
ISTRUZIONI PER L’USO
I
INSTRUCTIONS FOR USE
EN
REPLACING POWER SUPPLY FUSE (CIGARETTE LIGHTER PLUG)
The fuse is located in the cigarette lighter plug. Make sure that the power supply is not connected
to the mains.
Loosen the ring nut on the plug head by hand; remove the damaged fuse and replace it with a fuse
with the same characteristics. Lock the ring nut by hand.
TROUBLESHOOTING
GENERAL QUESTIONS AND ANSWERS
PROBLEM
SOLUTION
Only one or two LEDs go on; you have been
trying to charge the starter for over 24 hours,
and the other LEDs do not go on.
Check that the LEDs on the power supply are on.
Check that the fuse in the cigarette lighter plug of
the power supply is not defective.
Please contact your dealer.
No LEDs turn on, but when the charger is
plugged in, all the LEDs turn on.
Defective battery. The starter may have been
subjected to excessively intensive use, without ha-
ving been allowed to cool down. Please also refer
to the operating instructions
The starter is fully charged, but it does not
work.
Check that that the cables are firmly connected to
the posts of the battery.
Item 1498/24 – The starter works at 12V, but
it does not work at 24V.
Either battery is defective, or the selector switch
does not work properly. Please contact your
dealer.
While charging, the “FAULT” LED goes on on
the power supply of the 12V-24V starter.
Please contact your dealer.
QUESTION
ANSWER
How many starts can the starter perform with
one charge?
The number may vary from 1 to 30, depending on the
temperature, the general condition of the vehicle, the
type and dimensions of the engine.
Can the battery of the starter be replaced?
Yes, it can. Please contact your dealer.
Which is the optimal storage temperature?
The optimal temperature to preserve the internal
battery is 25 °C.
Can I charge the starter with a charger with
similar characteristics?
No, you can’t. You can only use the charger sup-
plied with the product. You can reorder the charger
from your dealer, if need be.
