Beta Motorcycles RR-S 350 EFI 2020, Руководство пользователя

Страница: 41 / 91

4
C
HEC
KS AND MAINTENAN
CE
40
USA
ENGINE OIL
CHECK THE LEVEL
1) Keep the vehicle in vertical position
relative to the ground.
2) Position the drive on a flat base ensuring
stability.
3) Start the engine and keep it running for
about 2 minutes.
4) Keeping the engine idling, check that the
oil level reach middle of the of the inspec-
tion window
1
.
5) If the level is below the edge of the win-
dow, switch off the engine and top up
through the filler hole
2
. Load oil until it
reaches the upper edge of the window.
6) Close the filling hole with the plug
2
and
repeat steps 3, 4 and 5 until the condition
in step 4 is satisfied.
Use the oil indicated on page 15 in
the “Recommended lubricants and liquids”
table.
REPLACEMENT
Always perform the replacement when
engine is hot:
- Position the drive on a flat base ensuring
stability.
- Remove the engine casing (page 80).
- Place a container under the engine.
WARNING:
Hot oil can cause severe burns!
- Unscrew filler plug
1
and drain plug
2
.
- Remove the wire mesh filter.
- Drain all the oil from the crankcase.
- Thoroughly clean the drain plug, the wire
mesh filter and the sealing surfaces.
- Mount the wire mesh filter and the drain
plug.
- Tighten to the torque indicated.
1
2
2
1
15Nm
M04_L0068
M04_L0069
M04_L0079