Beta Motorcycles RR 125 2018, Руководство пользователя

Страница: 45 / 88

3
ADJUSTMENTS
44
EN
B
SHOCK ABSORBER
ADJUSTING THE REBOUND
DAMPER
Turn screw A to adjust the hydraulic re-
bound damper.
Turning the screw anticlockwise (out) de-
creases the damping effect.
For standard setting, refer to page 11.
ADJUSTING THE HYDRAULIC
COMPRESSION DAMPER (HIGH
AND LOW SPEEDS)
Adjustment for low compression speed:
%
Using a screwdriver, loosen screw C
by turning it clockwise to increase the
hydraulic compression damper.
For standard setting, refer to page 11.
Adjustment for high compression speed:
%
Turn knob D anticlockwise to decrease the
hydraulic compression damper.
For standard setting, refer to page 11.
A
C
D
ADJUSTING THE COMPRESSION
DAMPER
The hydraulic compression damper deter-
mines the behaviour of the telescopic fork
during compression and can be adjusted
by means of screw
B
located at the lower
end of the fork legs. Turning the screw
clockwise increases the action of the com-
pression damper; turning it anticlockwise
decreases the action of the compression
damper.
For standard calibration, refer to page 11.
WARNING:
Starting from the standard position, turn
the knob anticlockwise (with a closing
action), the center screw will have an
integral movement, then will rotate with
the knob.
For standard setting, refer to page 11.