manualshive.com logo in svg

Beta Motorcycles RR 125 2018, Руководство пользователя

Поделиться
Скачать
Beta Motorcycles RR 125 2018 Скачать руководство пользователя страница 35

2

OPERA

TION

34

EN

REFUELLING

Use super-unleaded petrol mixed with oil according to the percentages shown in 
the table. Use the oil indicated on page 16 in the “Recommended lubricants and 
liquids” table.

RR 125 Europe

RR 125

2%

2,5%

Fuel tank capacity is shown on page 10.

To refuel open the tank cap (page 18).

After refuelling, screw the cap back and tighten securely.

WARNING
The refuelling should be performed with the engine off.

WARNING

:

Fire hazard. Fuel is highly flammable.

Always stop the engine when refuelling and keep open flames and lighted 
cigarettes away.

Do not top up fuel while using a mobile phone.

Refuel in an open well ventilated area.

Pay special attention so that the fuel does not come into contact with hot parts of the 
vehicle. Immediately clean up any spilled fuel.

WARNING

: Risk of poisoning.

Fuel is poisonous liquid and a health hazard.

Fuel must not come into contact with the skin, eyes, and clothing. Do not breathe 
in the fuel vapours. If contact occurs with the eyes, rinse immediately with 
plenty of water and seek medical advice. If contact occurs with skin, immedi-
ately clean contaminated areas with soap and water If fuel is swallowed, 
contact a doctor immediately. Change clothing that is contaminated with fuel.

WARNING

: Environmental pollution hazard.

The fuel must not contaminate the ground water, the ground, or the sewage system.

Содержание RR 125 2018

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды