5
1
2
3
4
5
1
2
3
4
5
BLEEP ON/OFF
When highlighted as a yellow bar you can turn the key
sound on or off by pressing button
4
. If no further
functionality changes are required pressing button
5
saves settings and exits the SETTINGS menu.
Press button
2
to scroll down the screen to highlight -
RPM Calibrate
When highlighted as a yellow bar enter this option by
pressing button
4
.
By starting and pre-setting the engine speed in advance
with a tachograph to 1000RPM then navigating back to
this menu option and then pressing the right arrow button
3
the engine calibration is updated and saved
automatically.
Alternatively, calibration can be manually set without the
engine running by pressing buttons
1
or
2
to achieve
the relevant value as shown within the RPM Calibration
Chart or alternatively by using the calibration factor
calculation both found on page 9.
Button
1
increases the value, button
2
decreases the
value. Once the correct value is highlighted press button
3
to save the setting.
Press button
5
to exit and return to the SETTINGS menu.
Pressing button
5
once more returns to the CONFIG
menu, pressing once more returns to the normal digital
dashboard.
Press button
2
to scroll down the SETTINGS screen to
highlight -
