9
4
5
x2
>2m
6
B. For in-ground pool:
1. Install the in-ground pool mounting bracket.
- Make sure the top surface of the pool edge is stable, flat and level.
- Drill two holes on the pool edge – in the center of the shorter side – where the mounting bracket will be installed. Pay attention to
the electrical, gas and water lines when drilling the holes.
2. Place the machine on the mounting unit.
3. Pull back the support plate, place it against the wall of the pool, and adjust it so the plate is placed securely against the pool wall.
4. Grab the height adjustment handles on both sides of the machine to raise or lower the motor underwater.
5. Use the set screw for enhanced stability.
Transformer assembly:
1. The transformer must be installed on a solid level area.
2. The transformer requires free circulation of air for cooling.
3. The transformer must be installed in a location protected from the moisture, rain
and splashing water.
Connecting the swimming machine unit to the transformer:
1. Be sure the transformer switch is OFF, and connect the transformer cable to a
grounded electrical outlet.
2. The transformer shall be placed at least 2m away from the pool. Connect the machine power cable plug to the transformer power
receptacle. Be sure the plug cover is securely tightened.
3. Turn the transformer switch ON.
440mm
240mm
8mm
