20
EN
7. Switch the appliance off by setting the On/Off switch to 0 (Off).
8. Pull the plug out of the socket.
9. Let the appliance cool down for about 15 minutes before using it again or storing it.
do not wrap the power cord around the appliance after using it.
if the device is overheating, the overheating protection will automatically switch off the appli-
ance. Allow the appliance to cool down for about 15 minutes before using it again.
cleAning And mAintenAnce
1. Pull the plug out of the wall socket and leave the
appliance to cool down.
2. Clean the appliance with a moisturized cloth and
polish it with a dry cloth.
The grid needs to be cleaned regularly, to prevent it
from overheating.
1. Turn the grid a bit to the left.
2. Pull the grid backward.
3. Remove possible hair and dust particles
4. Replace the grid.
There are 4 hooks. One of them is a bit wider. Put
this wider hook into the wider groove.
5. Turn the grid a bit to the right so it fits again.
• Make sure the plug has been removed from the wall socket before cleaning the appliance.
• Never use corrosive or scouring cleaning products or sharp objects (such as a knife or a hard brush)
to clean the appliance.
• Never immerse the appliance, the power cord or the plug in water or any other liquid.
the environment
• Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
• When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to the
symbols on the product, the user’s instructions or the packaging.
• The materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
• Contact your municipality for the address of the appropriate collection point in your neighbourhood.
guArAntee termS
The importer guarantees the appliance against defects caused by manufacturing and/or material faults for
60 months from the date of purchase, subject to the following conditions.
1. No charges will be made for labour costs or materials during the warranty period. Any repairs carried out
during the warranty period do not extend the warranty period.
2. The importer automatically becomes the owner of any faulty parts that he replaces or a faulty appliance
(in the event of replacement of the appliance).
3. All claims submitted under warranty must be accompanied by the original bill of sale.
4. Claims under warranty must be submitted to the dealer where the appliance was purchased or to the
importer.
5. The warranty is issued solely to the first purchaser and cannot be transferred.
6. The warranty does not cover damage caused by:
a. Accidents, incorrect use, wear and/or neglect.
b. Faulty installation and/or use in a manner contravening the prevailing legal, technical or safety regu
-
lations.
c. Connection to a mains voltage other than the voltage specified on the type plate.
Downloaded from www.vandenborre.be
