Bestron ASW217, Инструкция по эксплуатации

Страница: 17 / 32

instruction manual
17
English
sAfety instructions - general
• Please read these instructions carefully and retain them for future
reference.
• Use this appliance solely in accordance with these instructions.
• This appliance is not intended for use by persons (including children) with
reduced physical,sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the
appliance.
• Have any repairs carried out solely by a qualified electrician. Never try to
repair the appliance yourself.
sAfety instructions - electricity and heat
Certain parts of the appliance may get hot.
Do not touch these parts to prevent burning yourself.
• Verify that the mains voltage is the same as that indicated on the type plate
on the appliance before use.
• Always plug the appliance into an earthed wall socket.
• Always remove the plug from the wall socket when the appliance is not in
use.
• Always remove the plug from the wall socket by pulling on the plug, not the
power cord.
• Regularly check the appliance’s power cord to make sure it is not
damaged. Do not use the appliance if the power cord is damaged. Have a
damaged power cord replaced by a qualified service department.
• The appliance is fitted with a short power cord to reduce the risk that you
become entangled in the loose cord and, in so doing, cause the deep fryer
to topple and splash you with hot frying oil.
• Do not use an extension lead.
• The appliance needs space to allow heat to escape, thereby avoiding the
risk of fire. Make sure that the appliance has sufficient space around it,
and does not come in contact with flammable materials. The appliance
must not be covered.
• Never use the appliance in the vicinity of flammable materials.
• Make sure that the appliance, the power cord or the plug do not come into
contact with heat sources, such as a hot hob or naked flame.
• Make sure that the housing, the power cord and plug do not come in
contact with water.