Section 8
Secure Header/Fabric/#2 Bow/Side Bow Assembly to Door Rails
P14 - 54722 - Rev. I 0213
Installation Instructions - Supertop NX
© 2013 Bestop, Inc.
Page 14
Step 1
Align the Header/Fabric/Bow Assembly so
that the locking flange with brass bushing is
positioned above the spring-loaded locking
lever assembly in the top of the door rail.
While pushing in the latch release lever
on the underside of the door rail, slide the
Header/Fabric/Bow Assembly down so
that the locking flange aligns with the
spring-loaded locking pin.
Release the latch lever so that the locking
pin engages the brass bushing.
Repeat on the left side.
Step 1
Header/Fabric/Bow Assembly
Right Side Detail
Right Side
1
2
