Page 20
Section 14
Attach Header/Side Bow Assembly to #3 Bow
Step 1
With the Header/Side Bow Assembly
latched in place, pivot the #3 Bow forward,
and slide the slotted portion of each pivot
knuckle over the flange on the bottom of
each #3 Bow corner plate, so that the hole
in the flange and the hole in the pivot
knuckle are aligned.
Step 2
Fasten the pivot knuckle on the end of each
back leg of the Header/Side Bow Assembly
to the flange on the underside of each #3
Bow corner plate, using (1) Pivot Knuckle
Screw per side.
Step 1
Step 2
Header/Side Bow/Assembly
1
2
Right Side
Right Side
Hardware
Pivot Knuckle Screw
Qty. 1 per side
Part # 308.65