Section 7
Attach Side Bows to Header/Fabric Assembly (cont.)
Page 13
Step 2
Insert the end of the Right Side Bow into the
hole in the right side of the Header/Fabric
Assembly, aligning the two holes in the
tubing with the two holes in the header.
Make sure that the #2 Bow Bracket faces in.
Secure the Right Side Bow in place with
(4) #8 x 1/2” Pan Head Washer Screws:
two from the underside of the Header/Fabric
assembly, and two from the topside.
Repeat on left side, using Left Side Bow.
Step 3
Replace the protective flaps on both sides,
and re-insert the screws you set aside, two
for each side.
Step 3
Step 2
492.90 (Right)
Header/Fabric Assembly
1
2
Right Underside
2
1
Right Underside
Step 2
(cont.)
3
Right Topside
Hardware
Pan Head
Washer Screw
Qty. 4 per side
Part # 393.79