90005 1
Rev. B 1298
WARNING
This product is designed primarily to enhance the ap-
pearance of the vehicle and to shield the occupants from
ordinary weather conditions. Do not rely in any way on
the components of this product to contain occupants
within the vehicle, or to protect against injury or death in
the event of an accident. This top will not protect the
occupants from falling objects. Never operate vehicle in
excess of manufacturer’s specifications.
WEAR SEAT BELTS AT ALL TIMES
Read and follow, precisely, all installation instructions
provided when installing top. Failure to do so may result
in a poor fitting top and could place occupants of the
vehicle in a potentially dangerous situation.
Installation Tips
Before you begin installing this Duster assembly,
read all instructions thoroughly. Below are a few
tips to make this installation easier.
For a smooth fit:
For ease in installation, the Duster should be
installed at temperatures above 72
°
F. Below
this temperature, the fabric may contract an
inch or more, making it difficult to fit to the
vehicle.
It is normal for the fabric to contract and wrinkle
when stored in the shipping carton. Within a
few days after the installation, the fabric will
relax and the wrinkles will disappear.
Installation Instructions
For: CJ7 and Wrangler with Factory Hard Top
Part Number 90005
Congratulations on your purchasing decision. Bestop designed the Duster to give you years of dependability and
performance with proper care. If you encounter any problems during the installation of your Duster, or at any later
date, please contact your authorized Bestop dealer or call our Consumer Response Department, Monday - Friday,
8AM - 4:30PM (MST) at 1-800-346-3910 or (303) 465-1755 in Colorado.
All hardware required in the installation of this product,
except the tailgate retainer (Part Number 270.28),
must be removed from the vehicle for re-installation of
the factory hard top.