BESTip ATA 20L User Manual
33
2.
Once the system testing finishes,
the screen will display the local time
according to the country code you set
and Blue LED On-Line signal will be
on.
3.
You can press to see the
balance and the message “Ready for
Dial” will be shown on the display as
well.
Pick up your telephone handset now, and you can hear a ready
tone that means the basic installation is finished successfully.
Note
: The LCD screen will show the current time of your
country according to the country code pre-configured. If the time
displayed is counted from 00:00:00, it means your BESTip is
not successfully registered to the Gatekeeper and your network
connection or configuration might be incorrect. Please refer to
“Chapter 3: Setup
”
in this manual for network configuration.
If you see the
DNS Lookup Fail
flashing, it means your BESTip
has not successfully connected to the Internet. Please also refer
to “Chapter 3: Setup
”
in this manual to configure your network.
To Make a BESTip-to-BESTip Call
If the receiver you call is equipped with an BESTip, you may
enter the IP address directly and talk to the remote BESTip
receiver.
1.
Make sure that the receiver you want to call is equipped with
an BESTip connected to the Internet.
Internet
BESTip ATA 20L User Manual
34
2.
Pick up the handset, and you will hear a ready tone. Dial the
ID No. of the receiving party and ended with a # key, or you can
use the phone book to call the receiving party.
Note
: Every BESTip has a unique eight-digit ID number found
at the bottom of the device.
For example
：
The ID number of the receiving party is
19990023, so you need to dial 19990023#.
3.
Hold the handset, and wait for the connection. You will hear a
ringback tone indicating that your remote BESTip is ringing.
Otherwise, you will hear a busy tone if your remote BESTip user
is on the phone.
4.
Once the connection is established, you can enjoy your
communication with your receiving party.
5.
Hang up the phone once the conversation is done.
To Make a BESTip-to-Phone Call
With Internet Telephony Service Provider (ITSP) service
function ready, BESTip is able to call any real telephone around
the world. You need to have an active ITSP account to make
BESTip-to-Phone call.
In this mode, the receiver can answer an Internet phone call
with a regular phone.
1.
Make sure that your BESTip is setup properly, and connected
to the Internet
2.
Pick up the handset and you will hear a ready tone.
3.
Dial your destination number as you normally do from your
touch-tone phone.
Internet
