BESTip ATA 20L User Manual
31
5.
It will take about 3~5 minutes to
finish downloading depending on the
network traffic. If the new software
version is downloaded successfully,
BESTip will reboot itself automatically.
Please do not power off the device any time during software upgrade is
in progress, otherwise the device may not boot properly.
BESTip ATA 20L User Manual
32
Chapter 4: To Make an Internet Call
After having finished the setup in Chapter 3, you are ready to
operate your BESTip. Refer to the illustration below to connect
your BESTip with other devices.
Over Internet or TCP/IP networks, BESTip provides two modes
of voice communication: BESTip-to-BESTip and
BESTip-to-Phone modes. It allows BESTip users to save
greatly on long-distance and international call charges.
Hookup for BESTip ATA 20L
Testing Before Making a Call
After finishing the connection and configuration of your BESTip,
be sure the BESTip is turned on and well connected. You must
allow the BESTip to finish booting before operating.
1.
BESTip will start self-testing, and
the LCD screen will display as shown
right.
