BESTip ATA 11L User Manual
33
FXO Setting
－
Blind Dialout
The BESTip will detect the dial tones (at least 1 second) before
dialing. If there are no dial tones detected, the BESTip will cut
the line. However, sometimes the audible frequencies and/or
cadence of the dial tones appear unstable, so you need to set
Blind Dialout
ON
to make the BSETip not to detect the dial tones
and dial only after 1 second.
1.
Press button to enter the
Function Select
Mode.
2.
Press or button to
scroll the main menu till it appears
Function Select - FXO Setting
. And
then press to enter the option.
3.
Press or buttons to
scroll the menu till it appears
Blind
Dialout
. And then press to
enter the option.
4.
To avoid failure of detecting dial
tone, you may force the device to dial
out. Turn on the function, the device
would dial out after one second
without detecting dial tone.
FXO Setting
－
Outward Password
1.
Press button to enter the
Function Select
Mode.
2.
Press or button to
scroll the main menu till it appears
Function Select - FXO Setting
. And
then press to enter the option.
BESTip ATA 11L User Manual
34
3.
Press or buttons to
scroll the menu till it appears
Outward
Password
. And then press to
enter the option.
4.
To protect FXO usage from stealing
credit, you may set up password. With
this setting, others have to enter the
password before using FXO calling
out.
FXO Setting
－
CP Tone Setup
CP
Tone
(Call Progress tone)
Setup
allows BESTip ATA 11L to
identify the type of telephony signaling tone for which tone
cadence are being specified. CP tone is a means provided by
telephone switch to indicate the progressive status of a call.
The BESTip ATA 11L is embedded with the DSP chipset and
call progress tone detection algorithm module, so it can detects
the presence of call progress tones including busy tone,
disconnection tone, ringback tone and dual ringback tone.
It is programmable to detect any call progress tones in specified
frequency range between 300 Hz and 650 Hz
Generally, busy tone, disconnection tone and ringback tone are
single duration call progress tone (as shown below). However,
in some regions and PBX systems, ringback tones belong to
dual duration call progress tone.
1st Tone
1st Tone
ON
OFF
Single Duration Call Progress Tone