BESTip ATA 11L User Manual
25
Other Common Setup
After selecting and configuring the
IP Policy
, you
need to continue to set the following parameters.
Remember to press button to effect the
setting and go to the next option.
1. Station ID
:
The default value is
1. The configuration is needed to be
changed only when you connect
more than one BESTip devices at
NAT router. You must set these
BSETip devices with different
Station ID.
2. Gatekeeper
: There are four
options you can select:AUTO, Type
1, Type 2 and OFF. “Auto” is
applicable most of the time. Select
OFF only if your BESTip is
connected in a private network.
3. Country Code
: Please key in
your country’s telephone Country
Code. For example, “1” for USA,
“44” for U.K.
4. Area Code
: Please key in your
state/city telephone Area Code.
5. IDD Prefix
: Please key in the
International Direct Dial prefix code.
“00” in most cases.
BESTip ATA 11L User Manual
26
6. 2nd IDD Prefix
: Please key in
the second International Direct Dial
code. This option is needed for
s7ome Caribbean Sea countries.
Keep this option blank if it is not the
case.
7. DDD Prefix
: Please key in the
Domestic Direct Dial prefix code.
“0” in most cases.
8. Mobile Pincode:
Turn it on
unless you have applied for
business use. See “Mobile Pincode”
in this chapter.
9. Play Volume
: The default value
is 0dB. You can set from -31dB to
31dB. 0 dB is suitable for most
cases. Please don’t make it too big
or too small.
10. Record Volume
: The default
value is 0dB. You can select from
-31dB to 31dB. 0 dB is suitable for
most cases. Please don’t make it
too big or too small.
11. Show CDR:
Turn it on and
CDR will show on the display after
call finished.
12. Polarity Reverse:
Normally set
to “OFF” unless your device is
applied for business purpose.