bester MiniMagster 1502, Руководство оператора

Страница: 25 / 42

25
Welding with Positive Polarity (DC+)
A delivered the machine is wired for Positive Polarity, which is required for solid wire.
The gun cable
is connected to the Positive (+) output terminal, but the work cable
is connected to the Negative (-) output terminal.
Welding with Negative Polarity (DC-)
The welding cables should be changed places on the output terminals: the gun cable
should be connected to the Negative (-) output terminal and the work cable
to the Positive (+) output terminal. This is the typical configuration is designed for Flux
Cored Welding (FCAW).
Final Action
‰
Connect the work cable to the work piece with the work clamp.
‰ Connect the shielding gas to the shielding gas input through the gas regulator.
‰ Insert the plug of the input power cord of the welder into the outlet of the supply
network.
‰ Switch on the welder. Switching on is indicated by lightening up of the power
indicator.
‰ Based on seam kind, joint type and welded material thickness, select proper welding
settings with the welding voltage switch and the WFS control knob.
‰
Obeying the appropriate regulations, you can start to weld.