bester Magster Series, Руководство оператора

Страница: 9 / 40

9
Water Cooling System (Magster 450W only)
1. Reservoir Filler
WARNING
You have to use coolant with technical specifica-
tions given by the producer.
Do not add water and other cooling medium to the
coolant.
Do not use automotive anti-freeze that contains
rust inhibitors or leak stoppers.
Do not use pre-packaged welding industry
coolants. These coolants may contain oil-based
substances, which attack the plastic components
of the cooling system.
2. Coolant Level Checking Window: The maximum
coolant level is indicated by the MAX marker, the
minimum level is indicated by the MIN marker.
WARNING
Do not operate machine without coolant in
reservoir. Never run pump dry
.
3. Cooling System Looping Hose
WARNING
You have to connect cooling system looping hose
when you use gas cooled welding gun. Otherwise
it may damage cooling system pump.
Final Actions
Connect the ground cable to the work piece with the
work clamp.
Connect the shielding gas cylinder to the shielding gas
input through the gas regulator.
Insert the plug of the power input cable of the welder
into the mains socket.
Switch on the power source with the power switch. It
is indicated by lighting up of the switch button.
Based on the seam kind, join type and material
thickness of the work piece, chose correct welding
settings with the welding voltage switch and wire
feeder controls.
Obeying the appropriate rules, begin to weld.
Setting Welding Voltage