BestAir AirJet 2000, Руководство пользователя, Страница: 7 / 14

7
Installation:
Plug in the appliance, it will emit a beep tone which signals that the appliance is in ready
to operate mode.
Now press the ON/OFF (Power) button on the control panel. The appliance starts and
signals again with another beep tone.
The „Power“-Symbol ( ) changes in colour from red (in Standby-Mode) to white (during
operation)
Basic Settings:
•
Low air fan speed (l)
•
Ionisator ‘on‘
•
All other functions are switched off.
The display will show the existing air humidity in %, the room temperature in °C and the
quantitative fine particle pollution level (PM 2.5).
The air quality indicator shows the actual fine particle pollution level using several
coloured LEDs in the air outlet.
PM 2.5 Pollution Indicated Colour
>100 red (high pollution)
50-100 yellow (middle pollution)
<50 blue (low pollution)
Operation:
ON/OFF Switch of the air purifier:
By pressing the „Power“ button the air purifier is switch ON or OFF. In standby mode it
glows red, during operation it glows white.
Regulating the air flow level:
By repeatedly pressing the button „Speed“ the desired level of air flow is regulated. Here
you can choose from 4 different air flow speed settings:
Display-
Indicator Description
S Silent mode (lowest air flow level)
L Low air flow level
M Middle air flow level
H High air flow level
The desired air flow level is shown next to the „Speed“ button