东莞市至上印花机械有限公司
Best Printing Machine Limited
30-30
Website:
Http://www.zsheatpress .com
Email: [email protected]
10023
图像
YDPI
太小
Drawing YDPI too small
确认图片横向纵向精度，横向（
X
方向）是滞是光栅的倍数，纵向（
Y
方向）是否是喷头物理数度的倍数
(X direction) is a multiple of the grating, vertical (Y direction) is a
multiple of the physical number of nozzles
10024
图像颜色不匹配
The image colors do not match
确认图片颜色数量与当前软件配置的颜色数量是否一致（附：
4
色加白，
能打印的颜色位
4
色和
5
色，不勾白墨打
4
色，勾上白墨打
5
色）
Make sure the color of the picture is the same as the number of colors
of the current software configuration (attached: 4-color plus white,
4-color and 5-color for printing, 4-color for white ink and 5 for white)
10025
超出宽幅
Beyond the wide
1.
图片宽度是否超出机器最大打印宽度
2.UV
灯喷头之间的距离及左灯到喷头
1
之间的距离是否设置过大
1. Whether the width of the picture exceeds the maximum print width
of the machine
2. The distance between the UV lamp head and the distance between
the left lamp and the nozzle 1 is too large
10026
读
FLASH
错误
Read Flash error
10027
分期错误
Date error
10028
42V
未开启
42V not startup
1.
检查
42V
电源是否在
36V
到
45V
之间
2.
检查喷头转接板是滞安装正确
3.
检查喷头数据线是否安装正确
4.
检查喷头转接板上的保险丝是否常
5.
确认是否是喷头问题
1. Check that the 42V power supply is between 36V and 45V
2. Check that the nozzle adapter plate is properly installed
3. Check the nozzle cable is installed correctly
4. Check if the fuse on the adapter plate is regular
5. Confirm whether the nozzle problem
10029
超出幅长
Beyond the length
1.
确认图片高度是否超出机器设置的长度（由参数
dwMaDi stance o
f YMove
控制）
2.
确认软件左下角
Y
位置是否为负数如果出现负数请勾选定位打印
（附有
Y
轴定位功能才有可能报此错误）
1. Make sure the height of the image exceeds the length set by the
machine (controlled by the parameter dwMaDi stance of Y-)
2. Check if the Y position in the lower left corner of the software is
negative. If a negative number is selected, please check the position
printing (Y axis positioning function may report this error)
10030
未检测到纸张
Paper is not detected