东莞市至上印花机械有限公司
Best Printing Machine Limited
30-14
Website:
Http://www.zsheatpress .com
Email: [email protected]
2.3 通电开机/
Start printer
2.3.1 选择合适的电源
（1）电源电压的要求：
根据国家和地区不同，可选用：
打印机电源：AC 220V 50HZ 或者 AC 110V 60HZ
电脑电源： 选择与电脑和显示器相匹配的电源要求
对该设备来说： 接地一定要良好。（建议在机器的接地端子上单独接一根接地线接大地）
为保证供电稳定，最好配置在线式 UPS 稳压电源。
2.3.1 Select the appropriate power supply
(1) Power supply voltage requirements:
According to different countries and regions, can choose:
Printer power supply: AC 220V 50HZ or AC 110V 60HZ
PC Power: Selects the power requirements that match the computer and monitor
For this equipment: Grounding must be good. (Recommended in the machine's ground terminal on a
separate then a ground wire to the earth)
In order to ensure stable power supply, the best configuration on-line UPS power supply.
CAUTION
请选用打印机标识的电源，以免因使用不符合要求的电源，而使机器被损坏。
（2）接通电源钱请仔细清理检查其内部的包装泡沫纸、胶带及固定喷头的卡子等。
（3）连接电源线
2.3.2 开机系统自检
注意：在开机之前建议用户先将小车人工左右满行程拉动一次，以确保打印台板无异物与喷头底板
干涉，确保小车架上的管路没有与打印机外壳有任何干涉
Please use the power of the printer logo, so as not to use the power supply does not meet the
requirements of the machine is damaged.
(2) Turn on the power supply Please carefully clean up check the internal packaging foam paper, tape
and fixed nozzle of the clamp and so on.
(3) Connect the power cord
2.3.2 boot system self-test
Note: Before turning on, it is recommended that you pull the car manually all the way around to ensure
that the platen does not interfere with the nozzle plate, and make sure the tubing on the carriage does
not interfere with the printer case.