5
Follow These Instructions to Install the Glass Tray
1.) After the board has been installed, pick the location that you would like your tray to be installed.
Mark a line at least 1” down from the bottom of the board. Make sure your location will not
interfere with the bottom Mounts that are holding the board.
2.) Place the Glass Tray (P-2) on the line and mark the right and left edges of the tray on the line.
Measure in 1” from the edge marks of the tray and make you marks.
.
E
C
E
P-2
D
5/16” Predrill
Hole in Wall (2)
Glass Board
3.) Predrill two 5/16” diameter holes at your marked points below the Glass Board on the wall. .
Push in a Plastic Anchor (C) in each hole. Attach a Glass Tray Mount (E) over the Plastic
Anchor (C) using one CS Screw(D) for each mount. .
4.) Slide in the Glass Tray (P-2) into the slots of the Glass Tray Mounts (E) and secure in place by
tightening the plastic set screws in the bottom flange of each mount. as shown in illustration #2.
Glass Board
83843-83850_10-4-11
3a.) Screw in a Drywall Anchor (F) at each of your marked points below the Glass Board on the wall.
Attach a Glass Tray Mount (E) over the Drywal Anchor (F) using one CS Screw(D) for each mount.
For Drywall :
E
D
F
Glass Board
