3
Measure the length and width of your new board. Determine the wall center line and height
off the floor that you want your new board to be located. Hold your board up in position and
draw a line 3/8” above the top edge of your board and 3/8” below the bottom edge of your
board. If your wall has studs, determine the centerline of the studs. It is recommended that
you tie into as many studs as possible when mounting your board. .
aring to Install
Preparing to Install Your New Visionary Board
NOTE: The proper installation of your board will require at least two people.
Tools required: Tape measure, chalkline, electric drill / screwdriver, drill and
screwdriver bits, stud finder and level. .
TM
