BEST PRICE 630741900000, Руководство пользователя

Страница: 53 / 62

53
t"OPJMDBOXJUIIBOEQVNQ BWBJMBCMFGSPN%*:
stores)
tMJUFSPGFOHJOFPJM 8
Assembling the mower
1. Take the mower and attachment parts out
of the packaging and check that all parts are
present (Fig. 2-3).
2. Attach the lower push bar (Fig. 4/Item 14) to
the mower housing using the screws (Fig. 3/Item
15). Attach the upper push bar (Fig. 1/Item 10)
to the lower push bar using the screws (Fig. 3/
Item 16) and the star nuts (Fig. 3/Item 17). Do not
forget to mount the starter cord guide (Fig. 5/
Item 18). Now hook in the Bowden wire for the
motor stop (Fig. 6).
Unhook the lever to make it easier to attach the
Bowden wires.
3. Then hook the starter cord in the starter cord
guide (Fig. 7)
4. Fasten the cable holder to the push bar (Fig. 8)
with the screw (Fig. 5/Item 12).
5. Fasten the cords to the push bar with one of
the cable ties (Fig. 3/Item 13), as shown in Fig. 9.
6. Lift the ejector flap with one hand and hook
the grass basket into the mounts on the housing
(Fig.11)
7. Mulching (Fig. 22)
In the mulching mode the cuttings are shredded
in the enclosed mower housing and then spread
back onto the lawn. It is not necessary to gather
and dispose of the grass.
Important: Mulching is only possible if the lawn
is relatively short.
To use the mulching function, disconnect the
debris bag, slide the mulching adaptor into the
ejector opening (Item A) and close the ejector
opening.
5.2 Setting the cutting height
Important! Adjust the cutting height only
when the engine is switched off.
t#FGPSFZPVCFHJOUPNPXDIFDLUPFOTVSFUIBU
the blade is not blunt and that none of the
fasteners are damaged. To prevent any
imbalance, replace blunt and/or damaged blades
as a set only (if applicable). To carry out this
check, first switch off the engine and pull the
spark plug boot.
t5IFDVUUJOHIFJHIUJTDFOUSBMMZBEKVTUFEXJUIUIF
cutting height adjustor lever (Fig. 1/Item 7). Up to
6 different cutting heights can be selected.
t1VMMUIFBEKVTUPSMFWFSPVUBOETFMFDUUIFEFTJSFE
cutting height. The lever snaps into the desired
position.
6. Operation
Important!
The engine does not come with oil in it.
Therefore, ensure that you add 0.6 liters of oil
before starting it up. Use normal, multigrade
oil (15W40). The oil level in the engine must
be checked each time before mowing. (see
Checking the oil level).
In order to avoid any unintentional start-ups
of the lawn mower, it comes equipped with an
engine brake (Fig. 10) which must be pulled
back before the engine can be started. When the
engine control lever is released it must return
to its initial position, at which point the engine
automatically switches off.
Before you start mowing, you should run through
this operation several times in order to ensure
that the machine is working properly.
Whenever you need to perform any kind of
adjustment and/or repair work on your lawn
mower, wait until the blade has come to a
complete stop.
Always switch off the engine before carrying out
any adjustments, maintenance or repairs.
6. Operation