Best Power Patriot Pro II 1000 VA, Руководство пользователя

Страница: 14 / 24

10 ENGLISH
Replacement Instructions - 750VA and 1000VA Models
1 Phone Best Power’s Wordwide Service to order a replacement battery pack. It must be the
same type and rating as the original batteries. See Battery infromation in Specifications.
2 If it is necessary, the batteries may be replaced while the Patriot Pro II is running with the
protected equipment attached. Option: You may switch off and unplug the protected load
equipment from the Patriot Pro II. Then, turn off the Patriot Pro II and disconnect the line
cord.
3 Pull the top of the plastic front cover forward, then release the bottom of the front cover
and carefully pull it away from the unit. Place the front cover, with the LED panel and
ribbon cable attached, on top of the unit so it is out of your way while replacing the
batteries.
4
Remove the two screws from the interior panel to gain access to the batteries.
5 Disconnect the red and black cables from the used battery pack.
6 Use the label attached to the batteries
to remove the batteries from the Patriot
Pro II.
7
Slide the new batteries into the unit.
Reconnect the cables to the new
battery pack: red to positive (+), black
to negative (-)
8 Position the battery cables so they will
not be pinched by the interior panel.
Install the panel with the screws.
Carefully snap the front cover, with
the attached LED panel and ribbon
cable, back onto the unit. Dispose of
old batteries properly.
9
If you followed the option in step 2: Reconnect the line cord to the Patriot Pro II and turn
the unit on. Reconnect the load equipment. Switch on the protected load equipment one
piece at a time.
Red
Black