If your door opening is out of square, the space around the doors will not
be even. You can remove and re-position the side trim to make allowances
for this. The side trim does not have to be flush with the frame of the door
opening. You can move the trim in or out to make the door spacing equal.
Barrel Bolt on the
back of left door
1.
Install (3) three 6" hinges to sides of the doors.
To position the hinge properly, hold the rectangular
plate against the frame. Use 2" black screws.
2.
Before fastening the hinges to the trim, temporarily
prop the doors in the opening. Leave a space at
the top and and between the doors and the side
trim to allow room for the doors to expand due
to humidity.
3
Determine position of hinges and install to side
trim with 2" screws.
4.
Install the window using the short white screws.
5.
Install door handle. When the handle is turned
the inside latch will hold doors closed.
6.
Install a barrel bolt on the lower back of the door
to secure this door in place when closed. You
will need to drill a hole for the round shaft to
drop into.
7.
Install another barrel bolt at the top of the door.
Left Door
Step 21 Install Doors
2x4 Frame
1x4 Trim
Siidng
Inside Door Latch
Door Stop
Door Handle
